3 days
In classe
o 
Privato
Sul posto,
In linea
o 
Centro di formazione
In linea
o
Centro di formazione
Obiettivo:
The objective of this 3-day training is to enable metrology operators, technicians, and engineers, who have little or no knowledge of the PolyWorks Metrology Suite, to perform 3D inspections using tools found in PolyWorks|InspectorTM. More specifically, it covers the key concepts of a typical inspection workflow for CNC CMMs with probing capabilities.
Prerequisiti:
- Trainees are familiar with their CNC CMM and its related equipment, including performing calibrations, using components, setting operational parameters (best practices), as well as performance, maintenance, and care.
- Trainees must have basic knowledge of metrology and be able to read engineering drawings.
- Trainees must have basic computer skills (Windows operating systems).
Struttura:
- Manage files and navigate through the PolyWorks® interface
- Create and edit a machine configuration
- Define a measurement plan and create a measurement sequence to perform the automated measurement of a part, online and offline
- Measure surface deviations and control part dimensions by CNC probing
- Align measured part to the CAD model
- Review, report, and share inspection results
- Inspect multiple pieces
Contenuto:
Manage files and navigate through the PolyWorks® interface
- Navigate through the PolyWorks Workspace Manager interface
- Create and save a workspace, locally or using PolyWorks|DataLoop
- Navigate through the PolyWorks|Inspector interface
- Create and save a PolyWorks|Inspector project, locally or using PolyWorks|DataLoop
Create and edit a machine configuration
- Create and edit a machine configuration
- Create and locate reference spheres
- Create tools
- Create and locate tool changers, specify ports
- Create and calibrate tool orientations
Define a measurement plan and create a measurement sequence
- Define a typical inspection workflow
- Import a CAD model and use as a Reference object
- Create features and comparison points
- Set dimensional and GD&T controls and tolerances
- Create a measurement sequence to perform the automated measurement of objects
- Accelerate measurement sequence creation using the assisted sequence creation tool
- Detect and avoid potential collisions
- Adjust the inspection project for a different device
- Prepare an inspection project using the Offline Simulation mode
Measure by CNC probing
- Measure objects using the Probe and CNC Probe methods
- Features and comparison points
Align measured part to the CAD model
- Align using a CMM Prealignment
- Align using Surface Points
- Align using objects
- Perpendicular Planes
- Plane, Axis, Center Point
- Best-Fit Measurement Objects
- Align using Datum Reference Frames
- Create coordinate systems
Review, report, and share inspection results
- Review measurement results using the Control Reviewer
- Structure measurement results using control views
- Create formatted reports using snapshots and tables
- Share and review inspection results using PolyWorks|Reviewer™
Inspect multiple pieces
- Create a piece template for multipiece inspections
- Review multipiece inspections using Object Control SPC