3 days
クラスルーム または プライベート
現場で, オンライン または トレーニングセンター

目的:

The objective of this 3-day training is to enable metrology operators, technicians, and engineers, who have little or no knowledge of the PolyWorks Metrology Suite, to perform 3D inspections using tools found in PolyWorks|InspectorTM. More specifically, it covers the key concepts of a typical inspection workflow for CNC CMMs with probing capabilities.

前提条件:

  • Trainees are familiar with their CNC CMM and its related equipment, including performing calibrations, using components, setting operational parameters (best practices), as well as performance, maintenance, and care.
  • Trainees must have basic knowledge of metrology and be able to read engineering drawings.
  • Trainees must have basic computer skills (Windows operating systems).

アウトライン:

  • Manage files and navigate through the PolyWorks® interface
  • Create and edit a machine configuration
  • Define a measurement plan and create a measurement sequence to perform the automated measurement of a part, online and offline
  • Measure surface deviations and control part dimensions by CNC probing
  • Align measured part to the CAD model
  • Review, report, and share inspection results
  • Inspect multiple pieces

コンテンツ:

Manage files and navigate through the PolyWorks® interface

  • Navigate through the PolyWorks Workspace Manager interface
  • Create and save a workspace, locally or using PolyWorks|DataLoop
  • Navigate through the PolyWorks|Inspector interface
  • Create and save a PolyWorks|Inspector project, locally or using PolyWorks|DataLoop

Create and edit a machine configuration

  • Create and edit a machine configuration
  • Create and locate reference spheres
  • Create tools
  • Create and locate tool changers, specify ports
  • Create and calibrate tool orientations

Define a measurement plan and create a measurement sequence

  • Define a typical inspection workflow
  • Import a CAD model and use as a Reference object
  • Create features and comparison points
  • Set dimensional and GD&T controls and tolerances
  • Create a measurement sequence to perform the automated measurement of objects
  • Accelerate measurement sequence creation using the assisted sequence creation tool
  • Detect and avoid potential collisions
  • Adjust the inspection project for a different device
  • Prepare an inspection project using the Offline Simulation mode

Measure by CNC probing

  • Measure objects using the Probe and CNC Probe methods 
    •  Features and comparison points

Align measured part to the CAD model

  • Align using a CMM Prealignment
  • Align using Surface Points
  • Align using objects
    • Perpendicular Planes
    • Plane, Axis, Center Point
    • Best-Fit Measurement Objects
  • Align using Datum Reference Frames
  • Create coordinate systems

Review, report, and share inspection results

  • Review measurement results using the Control Reviewer
  • Structure measurement results using control views
  • Create formatted reports using snapshots and tables
  • Share and review inspection results using PolyWorks|Reviewer™

Inspect multiple pieces

  • Create a piece template for multipiece inspections
  • Review multipiece inspections using Object Control SPC